Nanofabrication/Equipment/ Metal Sputter System

From CNM Wiki
< Nanofabrication‎ | Equipment
Revision as of 20:27, November 23, 2020 by Csmiller (talk | contribs) (Created page with "== AJA Sputter System (metals)== right|400px| The instrument is located in the clean room, File:Smallaja2.JPG|right|400px| The instrument is located...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

AJA Sputter System (metals)

The instrument is located in the clean room,


Features

The AJA general sputtering tool is an on-axis magnetron sputtering tool. The tool has 3, 2” diameter targets with multiple degrees of freedom (tilt, z-axis position), heating capabilities up to 800 °C across a 150 mm wafer, 1-RF and 3-DC sources, a load lock system, and computer automated control. This tool provides fast deposition rates for both metals (DC sputtering) and oxides (RF sputtering) because of the 2” target sizes.

User Proposal Feasibility

When requesting the use of this instrument, please provide the following information in your user proposal:

  • Sample materials, shapes, and sizes
  • Temperature compatibility of samples.
  • Number of samples to process or number of times of instrument usage

Questions? Please contact the instrument custodian before submitting your proposal.