HPC/Network Access/PuTTY Configuration: Difference between revisions

From CNM Wiki
Jump to navigation Jump to search
mNo edit summary
Line 16: Line 16:
== Connecting to Carbon ==
== Connecting to Carbon ==
* [[HPC/Network Access/PuTTY Configuration/Connecting to the SSH Gateway | Connecting to the SSH Gateway]]
* [[HPC/Network Access/PuTTY Configuration/Connecting to the SSH Gateway | Connecting to the SSH Gateway]]
* [[HPC/Network Access/PuTTY Configuration/Connecting to the SSH Gateway | Connecting to a Carbon login node]]
* [[HPC/Network Access/PuTTY Configuration/Connecting to a Carbon login node | Connecting to a Carbon login node]]
 
== Connecting to Carbon itself ==
# Open another PuTTY window.
# Select the session named '''Clogin''' and push Load.
# Make sure the Host Name field shows localhost.
#: [[Image:HPC 2012-08 PuTTY config 14 Load clogin.png]][[Image:HPC 2012-08 PuTTY config 15 Open clogin.png]]
# Push Open.
# Welcome to Carbon! - You should get our NOTICE TO USERS and a prompt saying login5 or login6 followed by /home/username.
#: [[Image:HPC 2012-08 PuTTY config 16 clogin prompt.png]][[Image:HPC 2012-08 PuTTY config 17 clogin OK.png]]


[[Category:HPC|Network]]
[[Category:HPC|Network]]

Revision as of 06:01, August 29, 2012

Introduction

The Carbon cluster is reachable from networks outside Argonne only through SSH tunneling or VPN. Either way has advantages and disadvantages. This page explains how to connect through an ssh tunnel.

Tunneling is a two-step process:

  1. Establish the tunnel.
  2. Connect through the tunnel.

Overview slides (pdf) and specifics for Carbon are detailed elsewhere. The PuTTY setup for both steps is illustrated below.

Note that the PuTTY Configuration panel is somewhat idiosyncratic to operate, notably regarding the concept of Sessions. Numerous screenshots on Google provide general guidance.

Configuring PuTTY to access Carbon

Connecting to Carbon

Retrieved from "https://wiki.anl.gov/wiki_cnm/index.php?title=HPC/Network_Access/PuTTY_Configuration&oldid=3870"