Hardware

From HELIOS Digital DAQ
Jump to navigation Jump to search

Details on HELIOS Digital DAQ Hardware

Below is information on the types and configurations of the hardware components used in the system. This info should be kept up to date in case of hardware failures.

Construction (To Do List)

Keep a list of things to do for construction and optimization of the the acquisition.

- Modify power supply on VME crates (x2)

- Take data with just digitizer (no trigger)

- Install cable for PC diagnostics

- Install pulse generator module

- Setup trigger boards and trigger system

- Move forward with Trigger IOC readout

- Determine data storage plan

- Determine online/offline sorting options


Input/Output Controllers (IOCs) [MVME5500]

Seven (7) IOCs, model type MVME5500, were purchased for the HELIOS acquisition. Due to an updated ethernet part on the board they required an updated board support package (BSP) from 1.2/1 -> 1.2/3. This was completed (after an additional update of VxWorks from 5.5 -> 5.5.2 (??)) by Andrew Johnson of APS. ADDITIONAL DETAILS ARE REQUIRED

One of these new IOCs has been flashed with the new BSP/VxWorks. The rest must be flashed. The flashing procedure is below.

Flashing IOC

- Ensure that Flash JUMPER is set to FLASH1 on the IOC you wish to flash.

- Login to the IOC you wish to flash

telnet ts <location>

where location is typically 20## from 0 - 99.

- Load the new bootrom of choice, currently (June 2015) we are using

tftpGet -d/dev/enet1 -c192.168.1.20 -s192.168.1.2     -g192.168.1.1 -fdgs2/bootrom.mv5500

you should see the following

Network Loading from: /dev/enet1
Loading File: dgs2/bootrom.mv5500
Load Address: 00695000
Download Buffer Size = 00200000
Client IP Address      = 192.168.1.20
Server IP Address      = 192.168.1.2
Gateway IP Address     = 192.168.1.1
Subnet IP Address Mask = 255.255.255.0
Network File Load in Progress...

This should take about HOW LONG??

- Ensure that you are flashing the memory you are not booted to by executing flashShow and seeing

flashShow
Device-Name  Base-Address,Size  Device-Size,Count  Boot  Type
/dev/flash0  F2000000,02000000  01000000,00000002  No    Intel 28F128
/dev/flash1  FF800000,00800000  00400000,00000002  Yes   Intel 28F320

NEVER FLASH THE MEMORY YOU ARE BOOTING FROM!!!

- Flash the new bootrom

flashProgram -d/dev/flash0 -o01f00100 -nfff00 -v

- Switch jumper to newly flashed FLASH0

- Check to make sure that the new BSP is loaded (ctrl-x to autoboot)

>
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>       ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]         (R)
>  ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]               ]]]]
>  ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]
>  ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]
>  ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]]
>  ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]
>  ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]
>  ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]
>  ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks version 5.5.2
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.6
>  ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-2006
>
>                                CPU: Motorola MVME5500-0163 - MPC 7457.  Processor #0.
>                               Memory Size: 0x20000000.  BSP version 1.2/3.
>
>

VME

Digitizers

Firmware documentation can be found here File:ANL Firmware for LBL Digitizer June 2015.pdf, this is from the hep/digital (NEED LOCATION) svn (rev 4129).

-LOG- 3/1/2015 - 16 Digitizers were delivered by HEP.

S/N:
 1    2    3    4    5    6    7    8    9    10   11   12
D8D, D8C, D8B, D90, D98, D97, D96, D95, D86, D8A, D8F, D8E, + 4 in Digios

5/18/2015 - 4 Digitizers were installed in DigiOS

5/21/2015 - 4 Digitizers were borrowed by DFMA

S/N D86, D8A, D8F, D8E

6/17/2015 - 3 Digitizers and 2 IOC cables borrowed by DGS/X-Array

S/N D90, D86, D8B