Locations: Difference between revisions
Line 62: | Line 62: | ||
IOC's are | IOC's are | ||
192.168.1.2X | 192.168.1.2X | ||
DAQ computer is | DAQ computer (digios1) is | ||
192.168.1. | 192.168.1.1 | ||
MAC2020 computer (helios-iMac) is | |||
192.168.1.164 | 192.168.1.164 | ||
Target Fan power switch is | |||
192.168.1.106 | |||
DAQ power switch is | |||
192.168.1.115 | |||
There are some unknown IP | |||
192.168.1.2 (the netbox?) | |||
192.168.1.3 | |||
192.168.1.81 | |||
Revision as of 22:46, April 5, 2021
Physical Location
Network Location Information
A drawing of the network is like this (2021-01-21).
The CISCO router is the only way to the onenet and internet.
The HP Switch is a main switch for all devices, like the DAQ PC and the MAC.
The HELIOS-DB and the windowsXP connects to the onenet directly.
We added 2 Network Power switch
IP: 192.168.1.106 for Target fan IP: 192.168.1.115 for DAQ
DAQ Computer
The data acquisition computer for digital HELIOS sits behind a NAT box. The NAT box is located at
digios1.onenet
or from the Mac
192.168.1.2
The HELIOS-DB, Mac2017 and the windowsXP connect to the onenet, the IPs are
HELIOS-DB : 192.168.203.23 (nickname: heliosdb)
windowsXP : 192.168.203.37
mac2017 : 192.168.203.34 (nickname: mac2017)
Login outside ANL
ssh -J <username>@login.phy.anl.gov <accountName>@<onenet_IP>
PC | accountName | onenetIP |
---|---|---|
DAQ | helios | digios1 |
Mac2017 | heliosdigios | mac2017 |
Nat Box / Rounter
The login for the cisco (cisco data page) is uname cisco and the gammasphere password
192.168.1.1
Notes on cisco setup: network -> wan -> iPv4 -> static -> 192.168.203.52 -> default .1 -> DNS .1
IOC's are
192.168.1.2X
DAQ computer (digios1) is
192.168.1.1
MAC2020 computer (helios-iMac) is
192.168.1.164
Target Fan power switch is
192.168.1.106
DAQ power switch is
192.168.1.115
There are some unknown IP
192.168.1.2 (the netbox?) 192.168.1.3 192.168.1.81
To scan all "active" devices in the CISCO network:
$nmap -F 192.168.1.*
Terminal Server
Info? (2.6.23-431.5.1.el6.i686 (RH 4.4.7-3) Login with root and gammasphere pswrd
telnet 192.168.1.3 200[1-X]
In the DAQ-PC, the IP and the corresponding "nickname" are saved in
/etc/hosts
$cat /etc/hosts 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 192.168.1.1 digios1 192.168.1.3 ts 192.168.1.20 ioc0 192.168.1.21 ioc1 192.168.1.22 ioc2 192.168.1.23 ioc3 192.168.1.24 ioc4 192.168.1.234 tllptgs
Physical Locations and ID's of Digitizers / Routers / Triggers
Really need a few figures with labels / diagrams.
- Serial numbers of system hardware
- Board ID numbers for data processing
- IP address and names of modules