Hardware: Difference between revisions

From HELIOS Digital DAQ
Jump to navigation Jump to search
 
(33 intermediate revisions by 4 users not shown)
Line 1: Line 1:
== Details on HELIOS Digital DAQ Hardware ==
== Overview ==


Below is information on the types and configurations of the hardware components used in the system. This info should be kept up to date in case of hardware failures.
The HELIOS Digital DAQ is consist of 5 main devices and 1 computing resource.
# The Digitizers
# DAQ (the data acquisition computer, located at the HELIOS experimental room, near the Digitizers)
# Windows ( the windows XP pc for magnet control, Bias control, Target fan control, & Laser range finder)
# MAC2020 (the iMac that use to do online analysis and remote control of the DAQ)
# MAC2017 (the iMac replace HeliosDB)
# Network Power Switch x 2
# HeliosDB (the Ubuntu pc for database and Grafana, remote to the Windows)
# LCRC ( the super computer cluster provided by ANL, use for data storage and other computation )


= Construction (To Do List)=
[[File:Devices.png|800px|frameless]]
Keep a list of things to do for construction and optimization of the the acquisition.


- Modify power supply on VME crates (x2)
== Control and Data Flow ==


- Take data with just digitizer (no trigger)
[[File:Dataflow&control.png|800px|frameless]]


- Install cable for PC diagnostics
= Setup of Array-RF TAC =
- can we see NIM signals from triggers out of router or master trigger?
-- First likely need trigger map for energy signals, e.g., not Internal mode but (TTL or TTCL modes).


- Install pulse generator module
- Able to take various data inputs...RF Stop, TAC, MT A/B outputs (w/ or w/ out cfd post-processing...)


- Setup trigger boards and trigger system
= VME =


- Move forward with Trigger IOC readout
Power supply polarities need to be switched to accommodate additional power of new digitizers!


- Determine data storage plan
= Digitizers =


- Determine online/offline sorting options
-Documentation-


'''Firmware''' documentation can be found here [[File:ANL_Firmware_for_LBL_Digitizer_June_2015.pdf]], this is from the hep/digital gs svn (rev 4129); see [https://svn.inside.anl.gov/repos/dgs/Documentation/Formal/DGS%20System%20Documentation/Firmware/Digitizer/ANL%20Firmware%20for%20LBL%20Digitizer.pdf  DGS SVN Repo] for the latest version.  This svn repo requires authentication; contact [mailto:[email protected] John Anderson] for access.


= Input/Output Controllers (IOCs) [MVME5500] =
-Firmware Status-


Seven (7) IOCs, model type MVME5500, were purchased for the HELIOS acquisition. Due to an updated ethernet part on the board they required an updated board support package (BSP) from 1.2/1 -> 1.2/3. This was completed (after an additional update of VxWorks from 5.5 -> 5.5.2 (??)) by Andrew Johnson of APS. '''ADDITIONAL DETAILS ARE REQUIRED'''
Information on latest digitizer firmware flash / status
Date          Firmware Data        SVN Location          Local Location                Notes
10/19/2016    20160717              TBD                    /home/dgs/firmware_images    Done by CRH


One of these new IOCs has been flashed with the new BSP/VxWorks. The rest must be flashed. The flashing procedure is below.
-Firmware Flash Notes-


'''Flashing IOC'''
Uses files '''flash_helios.js''' '''asynRecordsHelios.txt''' and '''javaCon.''' These can be found in ''/home/dgs/tmadden/swWork/workspace/epicsClient/src''


- Ensure that JUMPER # is set to '''FLASH1''' on the IOC you wish to flash.
-LOG-


- Login to the IOC you wish to flash
10/19/2016 - All digitizers in digios1 have been updated to 20160717. Need a list of all digitizer IDs.
telnet ts <location>
where location is typically 20## from 0 - 99.


- Load the new bootrom of choice, currently (June 2015) we are using
5/28/2016 - Digitizers in F-Wing lab(Last 5 were tested at HEP by SAK, JW, DSG, with help from JTA)
  tftpGet -d/dev/enet1 -c192.168.1.20 -s192.168.1.2    -g192.168.1.1 -fdgs2/bootrom.mv5500
  S/N D87, D81, D84, D95, D98, D88, C8, C29, D97, D8D, C46, C42, C5A, 0B2, C37, D89


- Ensure that you are flashing the memory you are not booted to by executing
flashShow


- Flash the new bootrom
flashProgram -d/dev/flash0 -o01f00100 -nfff00 -v


- Switch jumper to XXX
11/9/2015 - Digitizers in my possession updated to current firmware (DONE IN BOLD - XXX-XXX)
S/N:
  1    2    3    4    5    6    7    8    9    10  11  12  13  14  15  16
  '''D81''', '''D84''', D86, '''D87''', '''D88''', D8A, D8B, D8C, '''D8D''', D8E, D8F, D90, '''D95''', '''D96''', '''D97''', '''D98''', '''C46''', '''0C8''
6/17/2015 - 3 Digitizers and 2 IOC cables borrowed by DGS/X-Array
S/N D90, D8C, D8B


- Check to make sure that the new BSP is loaded (???)
5/21/2015 - 4 Digitizers were borrowed by DFMA
  >
  S/N D86, D8A, D8F, D8E
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>      ]]]]]]]]]]]  ]]]]    ]]]]]]]]]]      ]]              ]]]]        (R)
>  ]    ]]]]]]]]]  ]]]]]]    ]]]]]]]]      ]]              ]]]]
>  ]]    ]]]]]]]  ]]]]]]]]    ]]]]]] ]    ]]                ]]]]
>  ]]]    ]]]]] ]    ]]]  ]    ]]]] ]]]  ]]]]]]]]]  ]]]] ]] ]]]]  ]]  ]]]]]
>  ]]]]    ]]]  ]]    ]  ]]]    ]] ]]]]] ]]]]]]  ]] ]]]]]]] ]]]] ]]  ]]]]
>  ]]]]]    ]  ]]]]    ]]]]]      ]]]]]]]] ]]]]  ]] ]]]]    ]]]]]]]    ]]]]
>  ]]]]]]      ]]]]]    ]]]]]]    ]  ]]]]]  ]]]]  ]] ]]]]    ]]]]]]]]    ]]]]
>  ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]  ]]]]  ]] ]]]]    ]]]] ]]]]    ]]]]
>  ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]    ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]      Development System
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]      VxWorks version '''5.5.2'''
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]      KERNEL: WIND version 2.6
>  ]]]]]]]]]]]]]]]]]]]]]]]]]      Copyright Wind River Systems, Inc., 1984-2006
>
>                                CPU: Motorola MVME5500-0163 - MPC 7457.  Processor #0.
>                              Memory Size: 0x20000000.  '''BSP version 1.2/3.'''
>
>


= VME =
5/18/2015 - 4 Digitizers were installed in DigiOS
 
= Digitizers =


'''Firmware''' documentation can be found here [[File:ANL_Firmware_for_LBL_Digitizer_June_2015.pdf]], this is from the hep/digital ('''NEED LOCATION''') svn (rev 4129).
-LOG-
3/1/2015 - 16 Digitizers were delivered by HEP.  
3/1/2015 - 16 Digitizers were delivered by HEP.  
  S/N:
  S/N:
   1    2    3    4    5    6    7    8    9    10  11  12
   1    2    3    4    5    6    7    8    9    10  11  12
  D8D, D8C, D8B, D90, D98, D97, D96, D95, D86, D8A, D8F, D8E, + 4 in Digios
  D8D, D8C, D8B, D90, D98, D97, D96, D95, D86, D8A, D8F, D8E, + 4 in Digios
5/18/2015 - 4 Digitizers were installed in DigiOS
5/21/2015 - 4 Digitizers were borrowed by DFMA
S/N D86, D8A, D8F, D8E
6/17/2015 - 3 Digitizers and 2 IOC cables borrowed by DGS/X-Array
S/N D90, D86, D8B

Latest revision as of 22:41, April 5, 2021

Overview

The HELIOS Digital DAQ is consist of 5 main devices and 1 computing resource.

  1. The Digitizers
  2. DAQ (the data acquisition computer, located at the HELIOS experimental room, near the Digitizers)
  3. Windows ( the windows XP pc for magnet control, Bias control, Target fan control, & Laser range finder)
  4. MAC2020 (the iMac that use to do online analysis and remote control of the DAQ)
  5. MAC2017 (the iMac replace HeliosDB)
  6. Network Power Switch x 2
  7. HeliosDB (the Ubuntu pc for database and Grafana, remote to the Windows)
  8. LCRC ( the super computer cluster provided by ANL, use for data storage and other computation )

Devices.png

Control and Data Flow

Dataflow&control.png

Setup of Array-RF TAC

- can we see NIM signals from triggers out of router or master trigger? -- First likely need trigger map for energy signals, e.g., not Internal mode but (TTL or TTCL modes).

- Able to take various data inputs...RF Stop, TAC, MT A/B outputs (w/ or w/ out cfd post-processing...)

VME

Power supply polarities need to be switched to accommodate additional power of new digitizers!

Digitizers

-Documentation-

Firmware documentation can be found here File:ANL Firmware for LBL Digitizer June 2015.pdf, this is from the hep/digital gs svn (rev 4129); see DGS SVN Repo for the latest version. This svn repo requires authentication; contact John Anderson for access.

-Firmware Status-

Information on latest digitizer firmware flash / status 

Date           Firmware Data         SVN Location           Local Location                Notes
10/19/2016     20160717              TBD                    /home/dgs/firmware_images     Done by CRH

-Firmware Flash Notes-

Uses files flash_helios.js asynRecordsHelios.txt and javaCon. These can be found in /home/dgs/tmadden/swWork/workspace/epicsClient/src

-LOG-

10/19/2016 - All digitizers in digios1 have been updated to 20160717. Need a list of all digitizer IDs.

5/28/2016 - Digitizers in F-Wing lab(Last 5 were tested at HEP by SAK, JW, DSG, with help from JTA) 

S/N D87, D81, D84, D95, D98, D88, C8, C29, D97, D8D, C46, C42, C5A, 0B2, C37, D89


11/9/2015 - Digitizers in my possession updated to current firmware (DONE IN BOLD - XXX-XXX) 

S/N:
 1    2    3    4    5    6    7    8    9    10   11   12   13   14   15   16
 D81', D84, D86, D87, D88, D8A, D8B, D8C, D8D, D8E, D8F, D90, D95, D96, D97, D98, C46, 0C8

6/17/2015 - 3 Digitizers and 2 IOC cables borrowed by DGS/X-Array 

S/N D90, D8C, D8B

5/21/2015 - 4 Digitizers were borrowed by DFMA 

S/N D86, D8A, D8F, D8E

5/18/2015 - 4 Digitizers were installed in DigiOS

3/1/2015 - 16 Digitizers were delivered by HEP. 

S/N:
 1    2    3    4    5    6    7    8    9    10   11   12
D8D, D8C, D8B, D90, D98, D97, D96, D95, D86, D8A, D8F, D8E, + 4 in Digios
Retrieved from "https://wiki.anl.gov/wiki_heliosdaq/index.php?title=Hardware&oldid=2403"