Raspberry Pi camera use

To boot the raspberry pi up

 connect cat6 cable to onenet switch (next to it)
 [connect monitor (HDMI)]
 [connect keyboard]
 [the wireless mouse should already be there]
 connect the usb power plug

It should then boot up and connect itself to onenet where it will have the IP

  192.168.203.2

The pi user password is now the default DGS password, not the default pi one!!

Booting it up with the cat6 cable attached, is the easiest way to make sure it comes up on onenet. On some machines it can also be reached as darekpi02 if DNS is set up properly

To use the raspberry pi camera to stream data

 sudo service motion stop
 ./motion -c motion-mmalcam-both.conf

that should start a little webserver so that you can see the live stream from a web browser as:

 http://192.168.203.2:8081

You will have to be on onenet to see the the video stream.

When you want to stop the stream, simply type crtl-c in the window you started the stream in

To configure the raspberry pi to use the streaming software do

 TBD [have history log file]

Thanks

Thanx to Kalle for setting up this system