The Slope Box Extension: Difference between revisions
No edit summary |
No edit summary |
||
| (23 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
'''''This image is clickable. Click text to go to the link.''''' | |||
The Slope Box Extension (SBX) unit contains a power board and '''[[The Pickoff Card|"pickoff card"]]''' along with an optional '''Raspberry Pi''' computer. As a whole, the SBX is there to handle much of the signals and processing between the detectors and the greater [[DAQ system|data acquisition system]]. The power board of the SBX provides all necessary power to the detector from a single source (48VDC), and allows a single detector and its SBX to be run entirely from one PoE (power over ethernet) port, enabling a detector to operate by itself. Meanwhile, the pickoff card converts signals from the detector to go to the digitizer. Understanding the SBX on a hardware level can be understood by observing the functions of the [[The Pickoff Card|pickoff card]]. | <imagemap> | ||
Image:SBX.png|thumb|600px|Figure 1. SBX contents | |||
poly 388 753 245 317 285 203 320 108 322 27 1147 27 1554 62 1533 467 1373 424 1366 221 1123 148 771 216 701 136 307 206 290 346 386 410 434 576 820 507 874 639 388 753 [[The Slope Box]] | |||
rect 801 256 1336 308 [[SBX Power Board]] | |||
rect 814 454 1361 561 [[The Pickoff Card]] | |||
rect 309 231 788 398 [[Raspberry Pi]] | |||
</imagemap> | |||
The Slope Box Extension (SBX) unit provides power to the detector and helps convert signals received from the detector to be sent to the [[Collector Box|collector box]]. It extends directly from the [[The Slope Box|slope box]]. The SBX contains a power board and '''[[The Pickoff Card|"pickoff card"]]''' along with an optional '''Raspberry Pi''' computer for standalone detecter operation. As a whole, the SBX is there to handle much of the signals and processing between the detectors and the greater [[DAQ system|data acquisition system]]. The power board of the SBX provides all necessary power to the detector from a single source (48VDC), and allows a single detector and its SBX to be run entirely from one PoE (power over ethernet) port, enabling a detector to operate by itself. Meanwhile, the pickoff card converts signals from the detector to go to the digitizer. Understanding the SBX on a hardware level can be understood by observing the functions of the [[The Pickoff Card|pickoff card]]. | |||
These electronics replace | These electronics replace all utility of the previously used "VXI system", while providing additional functionality previously unavailable. The addition of the Slope Box Extension moved all detector analog signal conditioning performed by the pickoff directly to the detector. Signal conversion prior to the existence of the SBX required extensive cabling and signal-carrying to the VXI sub-systems before being digitized. As a result of the changes, there is a significant reduction in cabling, and the elimination of the VXI sub-system that previously fulfilled the function of the SBX, making the detector easier to move in the future. The Slope Box Extension now drives a DVI-I cable containing the analog signals, power, and communication interface to a [[Collector Box|collector box]]. | ||
== | ==EDM Interface for Slope Box== | ||
The Raspberry Pi contains an | The Raspberry Pi contains an EDM screen allowing users to read and write process variables (PVs). The Slope Box PVs include detector controls and monitoring (HV, Temps, etc.), and the SBX Pickoff PVs include control for signal processing functions (DC offset, gain range, Preamp Reset Clamping, etc.). | ||
<imagemap> | <imagemap> | ||
Image:PickoffControl Screen.png|frame|center|alt=Test Image Map | Image:PickoffControl Screen.png|frame|center|alt=Test Image Map | ||
</imagemap> | </imagemap> | ||
''Go back to [[Gammasphere Detectors]]'' | |||
''Go back to [[Digital Gammasphere Upgrade Project]]'' | ''Go back to [[Digital Gammasphere Upgrade Project]]'' | ||
Latest revision as of 00:31, July 19, 2023
This image is clickable. Click text to go to the link.
The Slope Box Extension (SBX) unit provides power to the detector and helps convert signals received from the detector to be sent to the collector box. It extends directly from the slope box. The SBX contains a power board and "pickoff card" along with an optional Raspberry Pi computer for standalone detecter operation. As a whole, the SBX is there to handle much of the signals and processing between the detectors and the greater data acquisition system. The power board of the SBX provides all necessary power to the detector from a single source (48VDC), and allows a single detector and its SBX to be run entirely from one PoE (power over ethernet) port, enabling a detector to operate by itself. Meanwhile, the pickoff card converts signals from the detector to go to the digitizer. Understanding the SBX on a hardware level can be understood by observing the functions of the pickoff card.
These electronics replace all utility of the previously used "VXI system", while providing additional functionality previously unavailable. The addition of the Slope Box Extension moved all detector analog signal conditioning performed by the pickoff directly to the detector. Signal conversion prior to the existence of the SBX required extensive cabling and signal-carrying to the VXI sub-systems before being digitized. As a result of the changes, there is a significant reduction in cabling, and the elimination of the VXI sub-system that previously fulfilled the function of the SBX, making the detector easier to move in the future. The Slope Box Extension now drives a DVI-I cable containing the analog signals, power, and communication interface to a collector box.
EDM Interface for Slope Box
The Raspberry Pi contains an EDM screen allowing users to read and write process variables (PVs). The Slope Box PVs include detector controls and monitoring (HV, Temps, etc.), and the SBX Pickoff PVs include control for signal processing functions (DC offset, gain range, Preamp Reset Clamping, etc.).
Go back to Gammasphere Detectors
Go back to Digital Gammasphere Upgrade Project