Running the GEANT4 simulation code: Difference between revisions
Jump to navigation
Jump to search
Tlauritsen (talk | contribs) (Created page with "These notes are at the moment more to remind myself how to to things than to document anything Instructions for compiling on SL linux boxes cd ~/geant4 more README to run...") |
Tlauritsen (talk | contribs) |
||
| (12 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==intro== | |||
much in these instructions are for locals at the moment | |||
to run the code | ==Instructions for compiling on SL linux boxes== | ||
cd ~/geant4 | |||
#---- to compile clhep | |||
# --> not necessary anymore!! | |||
#---- to compile geant4 | |||
rm -rf geant4.9.6.p01 | |||
tar -zxvf tars/geant4.9.6.p01.tar.gz | |||
cd geant4.9.6.p01 | |||
mkdir data | |||
cd data | |||
tar -zxvf ../../tars/G4EMLOW.6.32.tar.gz | |||
tar -zxvf ../../tars/G4NEUTRONXS.1.2.tar.gz | |||
tar -zxvf ../../tars/G4PhotonEvaporation.2.3.tar.gz | |||
tar -zxvf ../../tars/G4PII.1.3.tar.gz | |||
tar -zxvf ../../tars/G4RadioactiveDecay.3.6.tar.gz | |||
tar -zxvf ../../tars/G4SAIDDATA.1.1.tar.gz | |||
tar -zxvf ../../tars/RealSurface.1.0.tar.gz | |||
cd .. | |||
mkdir geant4.9.6-build | |||
cd geant4.9.6-build | |||
cmake -DGEANT4_USE_OPENGL_X11=ON -DGEANT4_INSTALL_DATA=ON -DCMAKE_INSTALL_PREFIX=$HOME/geant4/geant4.9.6.p01/geant4.9.6-build $HOME/geant4/geant4.9.6.p01 | |||
. geant4make.sh | |||
make -j8 | |||
cd ../.. | |||
#---- to compile the LR agata/gretina simulator | |||
rm -rf v1.2.4 or whatevev the latest version name is v1.x | |||
tar -zxvf tars/v1.2.4.tgz | |||
cd v1.3 | |||
. ../geant4.9.6.p01/geant4.9.6-build/geant4make.sh | |||
make clean | |||
make | |||
# run an example of mac file for gretina | |||
~/geant4_workdir/bin/Linux-g++/UCGretina eu152/eu152.mac | |||
==to run the code== | |||
cd /home/tl/geant4/v1.3.0 | cd /home/tl/geant4/v1.3.0 | ||
| Line 15: | Line 53: | ||
or | or | ||
cd /home/tl/geant4/v1.3.0 | |||
. ../geant4.9.6.p01/geant4.9.6-build/geant4make.sh | . ../geant4.9.6.p01/geant4.9.6-build/geant4make.sh | ||
~/geant4_workdir/bin/Linux-g++/UCGretina co60/co60.mac | ~/geant4_workdir/bin/Linux-g++/UCGretina co60/co60.mac | ||
ls -lt *.out | ls -lt *.out | ||
mv co60.out /media/120621a/user/gtdata/G4Co60_NSCL/g4.dat | mv co60.out /media/120621a/user/gtdata/G4Co60_NSCL/g4.dat | ||
==Modify the included GRETINA modules== | |||
modify: GretinaGeometry/Greta/G120C4euler.list. Here is the complete list of GRETINA modules: | |||
0 0 288.00 0.00000 0.000 0 0 0 | |||
1 0 0.00 0.00000 0.000 0 0 0 | |||
2 0 72.00 0.00000 0.000 0 0 0 | |||
3 0 144.00 0.00000 0.000 0 0 0 | |||
4 0 216.00 0.00000 0.000 0 0 0 | |||
5 0 235.58 63.43495 16.420 0 0 0 | |||
6 0 91.58 63.43495 16.420 0 0 0 | |||
7 0 91.58 63.43495 88.420 0 0 0 | |||
8 0 91.58 63.43495 160.420 0 0 0 | |||
9 0 91.58 63.43495 232.420 0 0 0 | |||
10 0 -52.42 63.43495 304.420 0 0 0 | |||
11 0 -340.42 63.43495 304.420 0 0 0 | |||
12 0 -52.42 63.43495 16.420 0 0 0 | |||
13 0 19.58 63.43495 16.420 0 0 0 | |||
14 0 -52.42 63.43495 88.420 0 0 0 | |||
15 0 19.58 63.43495 88.420 0 0 0 | |||
16 0 -52.42 63.43495 160.420 0 0 0 | |||
17 0 19.58 63.43495 160.420 0 0 0 | |||
18 0 -52.42 63.43495 232.420 0 0 0 | |||
19 0 19.58 63.43495 232.420 0 0 0 | |||
20 0 55.58 116.56505 268.420 0 0 0 | |||
21 0 -88.42 116.56505 52.420 0 0 0 | |||
22 0 55.58 116.56505 52.420 0 0 0 | |||
23 0 55.58 116.56505 124.420 0 0 0 | |||
24 0 55.58 116.56505 196.420 0 0 0 | |||
25 0 -16.42 116.56505 340.420 0 0 0 | |||
26 0 -16.42 116.56505 52.420 0 0 0 | |||
27 0 -16.42 116.56505 124.420 0 0 0 | |||
28 0 -16.42 116.56505 196.420 0 0 0 | |||
29 0 -16.42 116.56505 268.420 0 0 0 | |||
Just include the ones you want to have in the array in the G120C4euler.list file | |||
==analyze the G4 mode2 data== | |||
To make mode2/mode1 data and analyze with GEBSort, you can do | |||
something like this: first download the GEBSort packages see https://wiki.anl.gov/wiki_gretina_at_anl/index.php?title=Tracking/off-line_sort_with_trackMain/GEBSort&oldid=1743 | |||
then | |||
make | |||
make G4toMode2_US | |||
that will make the G4toMode2_US program that can read the GEANT4 output files, pack the data and write it in mode2 format. | |||
rm GTDATA/g4_mode2.out | |||
./G4toMode2_US \ | |||
/media/120621a/user/gtdata/G4Co60_NSCL/g4.dat \ | |||
GTDATA/g4_mode2.out \ | |||
G4toMode2.chat > GTDATA/G4toMode2.log | |||
ls -lh GTDATA/g4_mode2.out | |||
You can look at this mode2 data with GEBSort_nogeb | |||
rm GTDATA/test.root | |||
./GEBSort_nogeb \ | |||
-input disk GTDATA/g4_mode2.out RECREATE \ | |||
-chat GEBSort.chat \ | |||
-rootfile GTDATA/test.root > GTDATA/GEBSort.log | |||
==analyze the G4 mode1/mode2 data== | |||
you can track the data and look at both the mode1 and mode2 data as | |||
rm GTDATA/g4_mode2.out | |||
./G4toMode2_US \ | |||
/media/120621a/user/gtdata/G4Co60_NSCL/g4.dat \ | |||
GTDATA/g4_mode2.out \ | |||
G4toMode2.chat > GTDATA/G4toMode2.log | |||
ls -lh GTDATA/g4_mode2.out | |||
./trackMain track.chat GTDATA/g4_mode2.out GTDATA/g4_mode1.out > GTDATA/trackMain.log | |||
rm GTDATA/test.root | |||
./GEBSort_nogeb \ | |||
-input disk GTDATA/g4_mode1.out RECREATE \ | |||
-chat GEBSort.chat \ | |||
-rootfile GTDATA/test.root > GTDATA/GEBSort.log | |||
Latest revision as of 22:01, June 17, 2013
intro
much in these instructions are for locals at the moment
Instructions for compiling on SL linux boxes
cd ~/geant4 #---- to compile clhep # --> not necessary anymore!! #---- to compile geant4 rm -rf geant4.9.6.p01 tar -zxvf tars/geant4.9.6.p01.tar.gz cd geant4.9.6.p01 mkdir data cd data tar -zxvf ../../tars/G4EMLOW.6.32.tar.gz tar -zxvf ../../tars/G4NEUTRONXS.1.2.tar.gz tar -zxvf ../../tars/G4PhotonEvaporation.2.3.tar.gz tar -zxvf ../../tars/G4PII.1.3.tar.gz tar -zxvf ../../tars/G4RadioactiveDecay.3.6.tar.gz tar -zxvf ../../tars/G4SAIDDATA.1.1.tar.gz tar -zxvf ../../tars/RealSurface.1.0.tar.gz cd .. mkdir geant4.9.6-build cd geant4.9.6-build cmake -DGEANT4_USE_OPENGL_X11=ON -DGEANT4_INSTALL_DATA=ON -DCMAKE_INSTALL_PREFIX=$HOME/geant4/geant4.9.6.p01/geant4.9.6-build $HOME/geant4/geant4.9.6.p01 . geant4make.sh make -j8 cd ../.. #---- to compile the LR agata/gretina simulator rm -rf v1.2.4 or whatevev the latest version name is v1.x tar -zxvf tars/v1.2.4.tgz cd v1.3 . ../geant4.9.6.p01/geant4.9.6-build/geant4make.sh make clean make # run an example of mac file for gretina ~/geant4_workdir/bin/Linux-g++/UCGretina eu152/eu152.mac
to run the code
cd /home/tl/geant4/v1.3.0 . ../geant4.9.6.p01/geant4.9.6-build/geant4make.sh ~/geant4_workdir/bin/Linux-g++/UCGretina eu152/eu152.mac ls -lt *.out
or
cd /home/tl/geant4/v1.3.0 . ../geant4.9.6.p01/geant4.9.6-build/geant4make.sh ~/geant4_workdir/bin/Linux-g++/UCGretina co60/co60.mac ls -lt *.out mv co60.out /media/120621a/user/gtdata/G4Co60_NSCL/g4.dat
Modify the included GRETINA modules
modify: GretinaGeometry/Greta/G120C4euler.list. Here is the complete list of GRETINA modules:
0 0 288.00 0.00000 0.000 0 0 0 1 0 0.00 0.00000 0.000 0 0 0 2 0 72.00 0.00000 0.000 0 0 0 3 0 144.00 0.00000 0.000 0 0 0 4 0 216.00 0.00000 0.000 0 0 0 5 0 235.58 63.43495 16.420 0 0 0 6 0 91.58 63.43495 16.420 0 0 0 7 0 91.58 63.43495 88.420 0 0 0 8 0 91.58 63.43495 160.420 0 0 0 9 0 91.58 63.43495 232.420 0 0 0 10 0 -52.42 63.43495 304.420 0 0 0 11 0 -340.42 63.43495 304.420 0 0 0 12 0 -52.42 63.43495 16.420 0 0 0 13 0 19.58 63.43495 16.420 0 0 0 14 0 -52.42 63.43495 88.420 0 0 0 15 0 19.58 63.43495 88.420 0 0 0 16 0 -52.42 63.43495 160.420 0 0 0 17 0 19.58 63.43495 160.420 0 0 0 18 0 -52.42 63.43495 232.420 0 0 0 19 0 19.58 63.43495 232.420 0 0 0 20 0 55.58 116.56505 268.420 0 0 0 21 0 -88.42 116.56505 52.420 0 0 0 22 0 55.58 116.56505 52.420 0 0 0 23 0 55.58 116.56505 124.420 0 0 0 24 0 55.58 116.56505 196.420 0 0 0 25 0 -16.42 116.56505 340.420 0 0 0 26 0 -16.42 116.56505 52.420 0 0 0 27 0 -16.42 116.56505 124.420 0 0 0 28 0 -16.42 116.56505 196.420 0 0 0 29 0 -16.42 116.56505 268.420 0 0 0
Just include the ones you want to have in the array in the G120C4euler.list file
analyze the G4 mode2 data
To make mode2/mode1 data and analyze with GEBSort, you can do something like this: first download the GEBSort packages see https://wiki.anl.gov/wiki_gretina_at_anl/index.php?title=Tracking/off-line_sort_with_trackMain/GEBSort&oldid=1743 then
make make G4toMode2_US
that will make the G4toMode2_US program that can read the GEANT4 output files, pack the data and write it in mode2 format.
rm GTDATA/g4_mode2.out
./G4toMode2_US \
/media/120621a/user/gtdata/G4Co60_NSCL/g4.dat \
GTDATA/g4_mode2.out \
G4toMode2.chat > GTDATA/G4toMode2.log
ls -lh GTDATA/g4_mode2.out
You can look at this mode2 data with GEBSort_nogeb
rm GTDATA/test.root ./GEBSort_nogeb \ -input disk GTDATA/g4_mode2.out RECREATE \ -chat GEBSort.chat \ -rootfile GTDATA/test.root > GTDATA/GEBSort.log
analyze the G4 mode1/mode2 data
you can track the data and look at both the mode1 and mode2 data as
rm GTDATA/g4_mode2.out
./G4toMode2_US \
/media/120621a/user/gtdata/G4Co60_NSCL/g4.dat \
GTDATA/g4_mode2.out \
G4toMode2.chat > GTDATA/G4toMode2.log
ls -lh GTDATA/g4_mode2.out
./trackMain track.chat GTDATA/g4_mode2.out GTDATA/g4_mode1.out > GTDATA/trackMain.log
rm GTDATA/test.root ./GEBSort_nogeb \ -input disk GTDATA/g4_mode1.out RECREATE \ -chat GEBSort.chat \ -rootfile GTDATA/test.root > GTDATA/GEBSort.log