HPC/Network Access/PuTTY Configuration/Accessing Carbon licenses remotely

Overview

Source Port	Destination	Options
VNL
6200	mgmt03:6200
6201	mgmt04:6200
COMSOL
1719	mgmt03:1719
33317	mgmt03:1718
33318	mgmt04:1718
33319	sched1:1718
Mathematica
TBD

• As long as port numbers between applications do not overlap, their tunnel configurations can coexist.
• Keep the default options Local, Auto for all tunnels.

Begin adding tunnels

1. In the main PuTTY Configuration window, click Session at the top of the tree on the left.
2. Select the Clogin session and push Load.

   

3. Verify that the name "localhost" appeared in the Host Name field above. Go back to step 1 if it does not.
4. Click "+" in front of SSH in the tree.
5. Click Tunnels.
6. If your session has existing tunnels and you wish to start over:
   • Select each existing entry in the "Forwarded ports:" field and push Remove.
   • No forwarded ports should remain at this point.

   

Add tunnels for VNL

1. Under Add new forwarded port, enter:
   • Source port: 6200
   • Destination: mgmt03:6200
   • Push Add.

   

2. Repeat with the following settings:
   • Source port: 6201 (not 6200!)
   • Destination: mgmt04:6200
   • Push Add.
   • You should now see these two entries:

   L6200  mgmt03:6200

   L6201  mgmt04:6200

   

Finish adding tunnels

1. Scroll to the top of the tree and click Session.
2. Verify that "Clogin" shows in the Saved Sessions field. If it does not, go back to section #Begin adding tunnels.
3. Push Save.