The Slope Box Extension: Difference between revisions

From GammaSphere DAQ
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:
Image:SBX.png|thumb|600px|SBX contents
Image:SBX.png|thumb|600px|SBX contents
poly 220 137 525 115 1181 157 1237 599 861 483 864 183 [[The Slope Box]]
poly 220 137 525 115 1181 157 1237 599 861 483 864 183 [[The Slope Box]]
poly 106 432 112 410 210 361 615 386 663 357 666 433 611 468 [[The Pickoff Card]]
</imagemap>
</imagemap>
The Slope Box Extension (SBX) unit contains a power board and '''[[The Pickoff Card|"pickoff card"]]''' along with an optional '''Raspberry Pi''' computer. As a whole, the SBX is there to handle much of the signals and processing between the detectors and the greater [[DAQ system|data acquisition system]]. The power board of the SBX provides all necessary power to the detector from a single source (48VDC), and allows a single detector and its SBX to be run entirely from one PoE (power over ethernet) port, enabling a detector to operate by itself. Meanwhile, the pickoff card converts signals from the detector to go to the digitizer. Understanding the SBX on a hardware level can be understood by observing the functions of the [[The Pickoff Card|pickoff card]].  
The Slope Box Extension (SBX) unit contains a power board and '''[[The Pickoff Card|"pickoff card"]]''' along with an optional '''Raspberry Pi''' computer. As a whole, the SBX is there to handle much of the signals and processing between the detectors and the greater [[DAQ system|data acquisition system]]. The power board of the SBX provides all necessary power to the detector from a single source (48VDC), and allows a single detector and its SBX to be run entirely from one PoE (power over ethernet) port, enabling a detector to operate by itself. Meanwhile, the pickoff card converts signals from the detector to go to the digitizer. Understanding the SBX on a hardware level can be understood by observing the functions of the [[The Pickoff Card|pickoff card]].  

Revision as of 18:56, February 9, 2023

The Slope BoxThe Pickoff Card
SBX contents

The Slope Box Extension (SBX) unit contains a power board and "pickoff card" along with an optional Raspberry Pi computer. As a whole, the SBX is there to handle much of the signals and processing between the detectors and the greater data acquisition system. The power board of the SBX provides all necessary power to the detector from a single source (48VDC), and allows a single detector and its SBX to be run entirely from one PoE (power over ethernet) port, enabling a detector to operate by itself. Meanwhile, the pickoff card converts signals from the detector to go to the digitizer. Understanding the SBX on a hardware level can be understood by observing the functions of the pickoff card.

These electronics replace ALL utility of the VXI system while providing additional functionality previously unavailable.

EPICS Interface for Slope Box

The Raspberry Pi contains an EPICS database allowing users to read and write process variables (PVs). The Slope Box PVs include detector controls and monitoring (HV, Temps, etc.), and the SBX Pickoff PVs include control for signal processing functions (DC offset, gain range, Preamp Reset Clamping, etc.).

Test Image Map
About this image

Go back to Digital Gammasphere Upgrade Project