The Slope Box Extension: Difference between revisions

From GammaSphere DAQ
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
[[File:SBX.png|thumb|600px|SBX contents]]
[[File:SBX.png|thumb|600px|SBX contents]]
The Slope Box Extension (SBX) unit contains a '''power board''' and '''pickoff card''' along with an optional '''Raspberry Pi''' computer. These electronics replace ALL utility of the VXI system while providing additional functionality previously unavailable.  
The Slope Box Extension (SBX) unit contains a '''power board''' and '''pickoff card''' along with an optional '''Raspberry Pi''' computer. These electronics replace ALL utility of the VXI system while providing additional functionality previously unavailable.
 
==[[EPICS Interface for Slope Box]]==


The R-Pi contains an EPICS database allowing users to read and write PVs:  
The R-Pi contains an EPICS database allowing users to read and write PVs:  

Revision as of 22:59, February 7, 2023

SBX contents

The Slope Box Extension (SBX) unit contains a power board and pickoff card along with an optional Raspberry Pi computer. These electronics replace ALL utility of the VXI system while providing additional functionality previously unavailable.

EPICS Interface for Slope Box

The R-Pi contains an EPICS database allowing users to read and write PVs:

  • The Slope Box for detector controls and monitoring (HV, Temps, etc.)
  • The SBX Pickoff for control of signal processing functions (DC offset, gain range, Preamp Reset Clamping, etc.)
Test Image Map
About this image

Go back to Digital Gammasphere Upgrade Project