Building the Entire System: Difference between revisions
Jump to navigation
Jump to search
(Created page with "==Building the entire software system== According to notes left from Tim Madden, a multi-stage make is required to build the .munch files for the IOCs. Munch files are raw b...") |
No edit summary |
||
| Line 11: | Line 11: | ||
On con5 enter the following commands | On con5 enter the following commands | ||
<pre> | |||
cd /global/devel/gretTop/9-22 | cd /global/devel/gretTop/9-22 | ||
cd dgsDrivers | cd dgsDrivers | ||
| Line 23: | Line 23: | ||
cd dgsIoc | cd dgsIoc | ||
make | make | ||
</pre> | |||
Revision as of 20:49, November 28, 2017
Building the entire software system
According to notes left from Tim Madden, a multi-stage make is required to build the .munch files for the IOCs. Munch files are raw binary executable for the MVME5500 generated by a cross compiler. The cross compiler resides on machine con5, a Sun Solaris machine. If that machine dies, we're probably in deep trouble.
Procedure as found on the dgs repository
- Ssh to con5 on onenet.
- This is a solaris sytem that has the vxWorks cross compilier.
- First you build various libraries of DGS, such as the Sender, board drivers, VME drivers.
- Then you build the whole system to link all the libraries together into a “munch” file, or vxWorks executable code.
On con5 enter the following commands
cd /global/devel/gretTop/9-22 cd dgsDrivers make cd .. cd dgsData make cd .. cd gretVME make cd dgsIoc make