DGS Commander EDM Screens: Difference between revisions

From GammaSphere DAQ
Jump to navigation Jump to search
No edit summary
No edit summary
 
(52 intermediate revisions by the same user not shown)
Line 1: Line 1:
This is an interactive image map of the DGS Commander EPICS screens. Click on text (these are buttons on the GUI) to proceed to the next screen. This allows you to explore the entire DAQ system without accidentally changing something during experimental operation.
This is an interactive image map of the DGS Commander EDM screens. EDM, the “Extensible Display Manager”, is the interface used for researchers to control and monitor their experiments with [[Gammasphere]]. Click on text in the picture (these are buttons on the GUI) to proceed to the next screen. This allows you to explore the [[DAQ system]] controls without accidentally changing something during experimental operation. ''Note that a lot of the information provided on the screens is duplicitous. There is a lot of the same information presented throughout these screens in different ways.'' The main screen below has 7 sections.  


<imagemap>
*Run Control: The Start/Stop and Save/NoSave buttons control data acquisition and data writing.
Image:DGSCommander Screen.png|frame|center|alt=Test Image Map
 
rect 11 96 114 130 [[Run Control Start/Stop]]
*Main Controller: The main controller holds different control and monitoring screens for waveform specifications, hardware, timing, and more.
rect 14 162 113 196 [[Run Control Save/NoSave]]
 
rect 139 92 296 129 [[Run Control Trigger]]
*Main Controller Side Panel: The side panel, between the main controller area and setup script state, is an extension of the main controller.
rect 139 158 297 190 [[Run Control Digitizers]]
 
rect 138 217 295 250 [[Run Control Count Rates]]
*VXI Heartbeat/Enabled Detectors: This area of the main screen is obsolete and was utilized as part of the previous DAQ system prior to upgrades.
 
*Temperatures: Monitoring screen for viewing the temperatures of each detector, and making sure they stay within a certain range.


rect 319 93 474 128 [[Run Control Global Control]]
*LN Main: The screens for maintain and monitoring the LN system.
rect 317 155 476 190 [[Run Control VME Status]]
rect 318 215 475 250 [[Run Control Live Time Stamps]]


rect 497 94 656 150 [[Run Control Terminals]]
*Setup Script State: An indicator part of the screen for scripts that can be run on the main controller.  
rect 498 156 657 190 [[Run Control Misc. Controls]]
rect 497 215 657 251 [[Run Control Scripts]]


rect 673 44 785 75 [[Run Control Aux Main]]
'''''You can click on any of the buttons or sections below to see the page for that item.'''''
rect 673 88 785 121 [[Run Control VXI/SBX Boards]]
rect 673 135 785 167 [[Run Control Ge High Volt.]]
<imagemap>
rect 673 183 785 215 [[Run Control Ge CFD]]
Image:MainCommander.png|frame|center
rect 673 227 785 261 [[Run Control Side Channel]]
rect 144 111 300 144 [[Trigger Options]]
rect 322 112 480 146 [[Global Control Screen]]
rect 503 111 658 144 [[Terminals]]
rect 144 173 301 205 [[Digitizers EDM]]
rect 323 171 480 204 [[VME Status]]
rect 503 172 659 205 [[Misc. Controls]]
rect 144 232 299 265 [[Count Rates]]
rect 324 233 480 264 [[Live Time Stamps]]
rect 503 231 659 265 [[EDM Scripts]]
rect 678 46 788 74 [[Aux Main]]
rect 679 86 788 115 [[VXI/SBX Boards]]
rect 680 126 787 154 [[Collector Box EDM]]
rect 680 168 788 194 [[Ge High Volt.]]
rect 680 207 788 234 [[Obsolete Screens]]
rect 679 247 789 274 [[Obsolete Screens]]
rect 17 106 116 134 [[Start/Stop Button]]
rect 17 164 116 193 [[Save/NoSave Button]]
rect 413 293 666 400 [[EDM Temperature Monitor]]
rect 670 293 795 401 [[LN Main]]
rect 798 39 993 412 [[Setup Script State EDM]]  
rect 4 293 408 401 [[Obsolete Screens]]
</imagemap>
</imagemap>
 
''Go back to [[Advanced User Guides]]''
''Go Back to [[Advanced User Guides]]''


''Go back to [[Digital Gammasphere Upgrade Project]]''
''Go back to [[Digital Gammasphere Upgrade Project]]''

Latest revision as of 15:52, March 23, 2023

This is an interactive image map of the DGS Commander EDM screens. EDM, the “Extensible Display Manager”, is the interface used for researchers to control and monitor their experiments with Gammasphere. Click on text in the picture (these are buttons on the GUI) to proceed to the next screen. This allows you to explore the DAQ system controls without accidentally changing something during experimental operation. Note that a lot of the information provided on the screens is duplicitous. There is a lot of the same information presented throughout these screens in different ways. The main screen below has 7 sections.

  • Run Control: The Start/Stop and Save/NoSave buttons control data acquisition and data writing.
  • Main Controller: The main controller holds different control and monitoring screens for waveform specifications, hardware, timing, and more.
  • Main Controller Side Panel: The side panel, between the main controller area and setup script state, is an extension of the main controller.
  • VXI Heartbeat/Enabled Detectors: This area of the main screen is obsolete and was utilized as part of the previous DAQ system prior to upgrades.
  • Temperatures: Monitoring screen for viewing the temperatures of each detector, and making sure they stay within a certain range.
  • LN Main: The screens for maintain and monitoring the LN system.
  • Setup Script State: An indicator part of the screen for scripts that can be run on the main controller.

You can click on any of the buttons or sections below to see the page for that item.

Trigger OptionsGlobal Control ScreenTerminalsDigitizers EDMVME StatusMisc. ControlsCount RatesLive Time StampsEDM ScriptsAux MainVXI/SBX BoardsCollector Box EDMGe High Volt.Obsolete ScreensObsolete ScreensStart/Stop ButtonSave/NoSave ButtonEDM Temperature MonitorLN MainSetup Script State EDMObsolete ScreensMainCommander.png
About this image

Go back to Advanced User Guides

Go back to Digital Gammasphere Upgrade Project

Retrieved from "https://wiki.anl.gov/wiki_gsdaq/index.php?title=DGS_Commander_EDM_Screens&oldid=4216"