Imaging optics module (IOM)

From CNM Wiki
Revision as of 22:19, April 13, 2009 by Vrose (talk | contribs)
Jump to navigation Jump to search

Back to X-Ray Microscopy

Zone plate and phase ring holder for full-field imaging mode

Zone plate

Objective in:
Objective X =-1114.9
Objective Y =-878.8
Objective Z =803.3
(RW 4/9/09)

Phase rings

The phase ring holder has space for three different phase rings to match the condenser illumination at 8-10 keV.

Position Phase Ring X Phase Ring Y Phase Ring Z
1 - - -
2 - - -
3 - - -

Phase ring specs.jpg


In order to use this module the focusing optics module (FOM) has to be set to a through hole. A condenser is aligned using the condenser Module (CM).