Condenser module (CM): Difference between revisions

From CNM Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 23: Line 23:




In order to use this module in full-field-mode the [[Focusing optics module (FOM)|focusing optics module (FOM)]] has to be set to a ''through hole''. The [[Imaging optics module (IOM)|imaging optics module (IOM)]] holds the zone plate optics for full-field imaging mode as well as three phase rings.
In order to use this module in full-field mode the [[Focusing optics module (FOM)|focusing optics module (FOM)]] has to be set to a ''through hole''. The [[Imaging optics module (IOM)|imaging optics module (IOM)]] holds the zone plate optics for full-field imaging mode as well as three phase rings.





Revision as of 15:29, April 14, 2009

Back to X-Ray Microscopy

Condenser module; upstream view
Position Condenser X Condenser Y Condenser Z Condenser Tip Condenser Tilt Remarks
1 1123.5 1256.0 -786.7 685.2 1910.8 RW 4/9/09
2 ??? - - - - -
3 ??? - - - - -
Optical Microscope ??? - - - - -


In order to use this module in full-field mode the focusing optics module (FOM) has to be set to a through hole. The imaging optics module (IOM) holds the zone plate optics for full-field imaging mode as well as three phase rings.


Aligned Configuration for Position 1 (10 keV)

Subcomponent Date Remarks
2009-04-04
COND-X 1120.6
COND-Y 1268
COND-Z –786.8
FOM-X 3910.2
FOM-Y –1093.3
FOM-Z –1999.7
SAM-X 39.4
SAM-Y –3590.7
SAM-Z –2451.9 CLOSE TO DOWNSTREAM LIMIT
OBJ-X –1113.8
OBJ-Y –876.6
OBJ-Z 811
Phase-X –21.9
Phase-Y 4.0
Phase-Z 0
Detector LowZ –642916 LIMIT
Detector MidZ –326346 LIMIT
Detector UpZ –382625 LIMIT
Intermediate Lens 0
Tubelens 3750