Ion chamber reading is not correct: Difference between revisions
Jump to navigation
Jump to search
(New page: '''Possible reason:''' The polarity of the supplied bias (usually 1kV) has to be matched to that of the amplifier. Also one needs to make sure that the “on” button is pressed, so that ...) |
No edit summary |
||
| Line 1: | Line 1: | ||
Back to [[X-Ray Microscopy]] | |||
'''Possible reason:''' The polarity of the supplied bias (usually 1kV) has to be matched to that of the amplifier. Also one needs to make sure that the “on” button is pressed, so that settings take effect. | '''Possible reason:''' The polarity of the supplied bias (usually 1kV) has to be matched to that of the amplifier. Also one needs to make sure that the “on” button is pressed, so that settings take effect. | ||
Revision as of 18:14, April 14, 2009
Back to X-Ray Microscopy
Possible reason: The polarity of the supplied bias (usually 1kV) has to be matched to that of the amplifier. Also one needs to make sure that the “on” button is pressed, so that settings take effect.