Imaging optics module (IOM): Difference between revisions
Jump to navigation
Jump to search
(New page: thumb|Zone plate and phase ring holder for full-field imaging mode ===Zone plate=== '''Objective in:'''<br /> Objective X =-1114.9 <br /> Objective Y =-...) |
No edit summary |
||
| Line 1: | Line 1: | ||
Back to [[X-Ray Microscopy]] | |||
[[Image:Phase rings.jpg|thumb|Zone plate and phase ring holder for full-field imaging mode]] | [[Image:Phase rings.jpg|thumb|Zone plate and phase ring holder for full-field imaging mode]] | ||
===Zone plate=== | ===Zone plate=== | ||
Revision as of 22:19, April 13, 2009
Back to X-Ray Microscopy
Zone plate
Objective in:
Objective X =-1114.9
Objective Y =-878.8
Objective Z =803.3
(RW 4/9/09)
Phase rings
The phase ring holder has space for three different phase rings to match the condenser illumination at 8-10 keV.
| Position | Phase Ring X | Phase Ring Y | Phase Ring Z | |
| 1 | - | - | - | |
| 2 | - | - | - | |
| 3 | - | - | - |
In order to use this module the focusing optics module (FOM) has to be set to a through hole. A condenser is aligned using the condenser Module (CM).