Condenser module (CM): Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
In order to use this module in full-field | In order to use this module in full-field mode the [[Focusing optics module (FOM)|focusing optics module (FOM)]] has to be set to a ''through hole''. The [[Imaging optics module (IOM)|imaging optics module (IOM)]] holds the zone plate optics for full-field imaging mode as well as three phase rings. | ||
Revision as of 15:29, April 14, 2009
Back to X-Ray Microscopy
| Position | Condenser X | Condenser Y | Condenser Z | Condenser Tip | Condenser Tilt | Remarks | |
| 1 | 1123.5 | 1256.0 | -786.7 | 685.2 | 1910.8 | RW 4/9/09 | |
| 2 | ??? | - | - | - | - | - | |
| 3 | ??? | - | - | - | - | - | |
| Optical Microscope | ??? | - | - | - | - | - |
In order to use this module in full-field mode the focusing optics module (FOM) has to be set to a through hole. The imaging optics module (IOM) holds the zone plate optics for full-field imaging mode as well as three phase rings.
Aligned Configuration for Position 1 (10 keV)
| Subcomponent | Date | Remarks |
|---|---|---|
| 2009-04-04 | ||
| COND-X | 1120.6 | |
| COND-Y | 1268 | |
| COND-Z | –786.8 | |
| FOM-X | 3910.2 | |
| FOM-Y | –1093.3 | |
| FOM-Z | –1999.7 | |
| SAM-X | 39.4 | |
| SAM-Y | –3590.7 | |
| SAM-Z | –2451.9 | CLOSE TO DOWNSTREAM LIMIT |
| OBJ-X | –1113.8 | |
| OBJ-Y | –876.6 | |
| OBJ-Z | 811 | |
| Phase-X | –21.9 | |
| Phase-Y | 4.0 | |
| Phase-Z | 0 | |
| Detector LowZ | –642916 | LIMIT |
| Detector MidZ | –326346 | LIMIT |
| Detector UpZ | –382625 | LIMIT |
| Intermediate Lens | 0 | |
| Tubelens | 3750 |