CNM Wiki - User contributions [en]

X-Ray Microscopy

2025-01-14T18:55:30Z

Tzhou:

__NOTOC__
{{X-ray Header}}
==Experiments==
*[[Diffraction]]
*[[Fluorescence]]
*[[Tomography]]

==Beamline==
*[[Nanoprobe Scanning Quick Reference]]
*[[Beamline Instrumentation]]
*[[Beamline Controls]]
*[[Beamline Alignment Quick Reference]]
*[[Nanoprobe Optics Information]]

==Multilayer Laue Lenses==
*[[The MLL Project]]

[[Category:XMG]]
[[Category:Fluorescence]]
[[Category:Diffraction]]
[[Category:Tomography]]
[[Category:Controls]]
[[Category:Beamline]]
[[Category:MLL]]

==New Capabilities==

Nanoprobe Scanning Quick Reference/dude

2021-10-18T18:06:22Z

Tzhou: /* Main interface */

==Get the latest version at home==
Go to '''https://hub.docker.com/r/danielzt12/dude''' 
check out the latest version, and specify that when executing the '''docker run''' command. 

==Load data==
'''File -> Open''', point to the mda folder and click '''OPEN'''. 
If you are using dude to look at data other than those acquired with the Eiger detector, change that under '''Settings -> Detector'''. 

==Main interface==
[1] '''right mouse click''' on the canvas or drag while clicked, show the corresponding detector images. Also work for 1D scans. 
[2] when doing step [1], the motor positions and detector values are also updated , under '''P0''' (Point 0). 
[3] '''left mouse click''' on the canvas updates the position under '''P1''' (Point 1), and calculates the distance between P1 and P0. Does not work for 1D scans. 
[4] disable '''Auto''' to change the min and max of the color scale. The colormap can be changed under '''Settings'''. Toggle '''Log''' to switch between log and linear scale. Toggle '''Scale''' to show / hide the scale bar. The scaler bar is valid for the vertical axis only, and is only valid for the horizontal axis if the step size in x and y are equal. 
[5] drag while clicked with '''left mouse button''' to make a rectangle on the canvas to zoom in. '''Scroll''' up and down to change the zoom. '''drag''' when zoomed to pan. 
[6] click '''Full''' to reset zoom. 
[7] '''hover''' on the canvas will update the pixel position and intensity values. Show calibrated angles instead by enabling "Settings -> Show Angle". This is only valid for '''eiger-in''' positions and if the angle calibration files are found under the '''Analysis''' folder. Disable and enable again if the calibration files have been changed. 

[5] change here to show values from existing detector channels.
[]

Nanoprobe Scanning Quick Reference/dude

2021-10-18T18:06:09Z

Tzhou: /* Main interface */

==Get the latest version at home==
Go to '''https://hub.docker.com/r/danielzt12/dude''' 
check out the latest version, and specify that when executing the '''docker run''' command. 

==Load data==
'''File -> Open''', point to the mda folder and click '''OPEN'''. 
If you are using dude to look at data other than those acquired with the Eiger detector, change that under '''Settings -> Detector'''. 

==Main interface==
[1] '''right mouse click''' on the canvas or drag while clicked, show the corresponding detector images. Also work for 1D scans. 
[2] when doing step [1], the motor positions and detector values are also updated , under '''P0''' (Point 0). 
[3] '''left mouse click''' on the canvas updates the position under '''P1''' (Point 1), and calculates the distance between P1 and P0. Does not work for 1D scans. 
[4] disable '''Auto''' to change the min and max of the color scale. The colormap can be changed under '''Settings'''. Toggle '''Log''' to switch between log and linear scale. Toggle '''Scale''' to show / hide the scale bar. The scaler bar is valid for the vertical axis only, and is only valid for the horizontal axis if the step size in x and y are equal. 
[5] drag while clicked with '''left mouse button''' to make a rectangle on the canvas to zoom in. '''Scroll''' up and down to change the zoom. '''drag''' when zoomed to pan. 
[6] click "Full" to reset zoom. 
[7] '''hover''' on the canvas will update the pixel position and intensity values. Show calibrated angles instead by enabling "Settings -> Show Angle". This is only valid for '''eiger-in''' positions and if the angle calibration files are found under the '''Analysis''' folder. Disable and enable again if the calibration files have been changed. 

[5] change here to show values from existing detector channels.
[]

Nanoprobe Scanning Quick Reference/dude

2021-10-18T18:05:45Z

Tzhou: /* Main interface */

==Get the latest version at home==
Go to '''https://hub.docker.com/r/danielzt12/dude''' 
check out the latest version, and specify that when executing the '''docker run''' command. 

==Load data==
'''File -> Open''', point to the mda folder and click '''OPEN'''. 
If you are using dude to look at data other than those acquired with the Eiger detector, change that under '''Settings -> Detector'''. 

==Main interface==
[1] '''right mouse click''' on the canvas or drag while clicked, show the corresponding detector images. Also work for 1D scans. 
[2] when doing step [1], the motor positions and detector values are also updated , under '''P0''' (Point 0). 
[3] '''left mouse click''' on the canvas updates the position under '''P1''' (Point 1), and calculates the distance between P1 and P0. Does not work for 1D scans. 
[4] disable '''Auto''' to change the min and max of the color scale. The colormap can be changed under '''Settings'''. Toggle '''Log''' to switch between log and linear scale. Toggle '''Scale''' to show / hide the scale bar. The scaler bar is valid for the vertical axis only, and is only valid for the horizontal axis if the step size in x and y are equal. 
[5] drag while clicked with '''left mouse button''' to make a rectangle on the canvas to zoom in. '''Scroll up and down''' to change the zoom. '''drag''' when zoomed to pan. 
[6] click "Full" to reset zoom. 
[7] '''hover''' on the canvas will update the pixel position and intensity values. Show calibrated angles instead by enabling "Settings -> Show Angle". This is only valid for '''eiger-in''' positions and if the angle calibration files are found under the '''Analysis''' folder. Disable and enable again if the calibration files have been changed. 

[5] change here to show values from existing detector channels.
[]

Nanoprobe Scanning Quick Reference/dude

2021-10-18T17:58:23Z

Tzhou: /* Main interface */

Nanoprobe Scanning Quick Reference/dude

2021-10-18T17:55:11Z

Tzhou: /* Main interface */

Nanoprobe Scanning Quick Reference/dude

2021-10-18T17:46:45Z

Tzhou:

Nanoprobe Scanning Quick Reference/dude

2021-10-18T17:44:16Z

Tzhou:

===Get the latest version at home===
Go to '''https://hub.docker.com/r/danielzt12/dude''' 
check out the latest version, and specify that when executing the '''docker run''' command. 

===Load data===
'''File -> Open''', point to the mda folder and click '''OPEN'''. 
If you are using dude to look at data other than those acquired with the Eiger detector, change that under '''Settings -> Detector'''. 

===Main interface===

Nanoprobe Scanning Quick Reference/dude

2021-10-18T17:42:13Z

Tzhou: /* Get the latest version */

Nanoprobe Scanning Quick Reference/dude

2021-10-18T17:37:51Z

Tzhou: Created page with "===Get the latest version==="

===Get the latest version===

Sandbox/News

2021-08-31T21:21:49Z

Tzhou: Created page with "# 2021R1 # 2021R2 # 2021R3"

# 2021R1

# 2021R2

# 2021R3