ToDo: Difference between revisions

From ATLAS Accelerator In-Flight Beam Program
Jump to navigation Jump to search
(Created page with "= RAISOR DAQ = - InfluxDB needs checked on raisordaq computer [and with Grafana] - Grafana needs to moved to raisordaq [or new iMAC] but cannot stay on diag3 == CAEN == - re-...")
 
Line 1: Line 1:
= RAISOR DAQ =  
= RAISOR DAQ =
- InfluxDB needs checked on raisordaq computer [and with Grafana]
- InfluxDB needs checked on raisordaq computer [and with Grafana]
- Grafana needs to moved to raisordaq [or new iMAC] but cannot stay on diag3
- Grafana needs to moved to raisordaq [or new iMAC] but cannot stay on diag3
== CAEN ==
== CAEN ==
- re-confirm data collection with 500 MHz 16-ch board
- re-confirm data collection with 500 MHz 16-ch board
- setup InfluxDB and Grafana with raisordaq and/or new interface computer
- setup InfluxDB and Grafana with raisordaq and/or new interface computer
- setup CAEN bridge on raisordaq
- setup CAEN bridge on raisordaq
-- setup HV control
-- setup HV control
- load new firmware and setup new 'fast' digitizers
- load new firmware and setup new 'fast' digitizers



Revision as of 16:21, June 23, 2022

RAISOR DAQ

- InfluxDB needs checked on raisordaq computer [and with Grafana]

- Grafana needs to moved to raisordaq [or new iMAC] but cannot stay on diag3

CAEN

- re-confirm data collection with 500 MHz 16-ch board

- setup InfluxDB and Grafana with raisordaq and/or new interface computer

- setup CAEN bridge on raisordaq

-- setup HV control

- load new firmware and setup new 'fast' digitizers

FC / Keithley readout

- Continue to test / search for a way to readout the keithley via usb - push data to InfluxDB / Grafana

BoxScore

- readout of MCP, new fast digitizers once working, and misc...