Infl11

General Info

• ²⁹Al(d,p)
• [July 19]
• ²⁹Al¹³⁺
• Location in in-flight ELOG
• @ HOMEPLATE and SHORTSTOP

Secondary Beam(s)

• ²⁹Al¹³⁺
• Energy: ~10 MeV/u
• Requested rate and purity:
  • 1x10⁴ pps, >10 %

• Achieved rate (pps/pnA):
  • (XXX pps/pnA) [XXX pnA ^XXXX^XX]

• Purity:
  • XXX% best, XXX% typical

Tuning Info

Primary Beam (energy) [max pnA]

• ³⁰Si^7+,14+ [11.5 MeV/u, 345 MeV][120 pnA]

• Target: 4 mg/cm2 Be (²⁹Al¹³⁺)

=========²⁹Al===========

²⁹Al - 4 mg/cm² target

Beam	Label	Energy [MeV]	Brho [Tm]	calc / TOF	Scale Factor	DE-E (50 / 1000 um)	q-Fraction	Target
30Si7+,14+	primary	345	XXX	calc		71 / 273 MeV		none
30Si14+	degraded	319.8	1.009	tof		76 / 244 MeV		4 mg/cm2 Be
29Al13+	secondary	307.4	1.04767	calc	3.8%	66 / 241 MeV		4 mg/cm2 Be
30Si13+	contam	297	1.04767	calc		80 / 217 MeV		4 mg/cm2 Be

• Scale Factor:
  • [June 19] ²⁹Al¹³⁺ [307.4 MeV] from ³⁰Si¹⁴⁺ [319.8 MeV] scale factor = 1.04767/1.009 = 1.038

• Expected calculated rates for tuning (acceptable - ideal):
  • At EXIT Detector: >250-1000 pps/pnA (midplane slits set to ~+-4 mm, ~3% momentum acceptance).
  • At HELIOS Cross Detector: >70-250 pps/pnA (assumes ~25% transmission, maybe on the high side...)